Engine code
P0014: Exhaust camshaft timing too far advanced (bank 1)
How much to fix P0014? Typically $180–$1,225.
Wide range: this job varies a lot. Itemize your quote for a better answer.
How this range is built
| Part of the job | Low | High |
|---|---|---|
| Parts | $60 | $500 |
| Labor: 1 to 4.5 hours × $110 to $150 an hour | $110 | $675 |
| Fees: shop supplies, disposal, diagnostics | $10 | $30 |
| Total, rounded | $180 | $1,225 |
The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.
Not a repair shop, estimates only. Typical range, estimate. Not a quote. Your car, parts and shop change the number.
This is the range for the most common fix, vvt solenoid / cam phaser repair. Which repair your car needs depends on a proper diagnosis.
This is the exhaust-side version of the cam timing codes. The exhaust camshaft on cylinder 1's bank is sitting further ahead than the computer commanded. Like its intake cousin, it often comes down to oil level and condition, or the solenoid that moves the cam.
- Safe to drive?
- Short trips only
- Most common cause
- Dirty or low engine oil
Short, gentle drives are usually okay, but fix it soon; stop if the engine rattles, stalls or the oil light comes on.
Get quotes from local shops
Got P0014? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.
Fair Price is not a contractor or a repair shop. Who sees your request
What you may notice
- Rough idle
- Loss of power
- Check-engine light on
- Ticking or rattle at startup
Common causes, most likely first
- Dirty or low engine oil
- Failing VVT or cam phaser solenoid
- Stretched timing chain or worn tensioner
- Clogged oil screen on the solenoid
- Wrong cam position sensor signal
Check this first
Check the oil level and how long since the last change. Old or low oil is the most common cause of timing-control codes.
Other repairs that sometimes fix P0014
| Repair | Typical range, US |
|---|---|
| Timing chain replacement | $1,125 to $2,550 |
| Camshaft position sensor replacement | $100 to $340 |
| Oil and filter change | $70 to $170 |
Before you pay
- Ask the shop what test showed this part is the cause, not just that the code appeared.
- Ask for parts and labor listed separately, and for the hours.
- Ask for a written OK before any extra work. Many states require written authorization before repairs.
Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.
Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).
P0014 questions
Can low oil cause this?
Yes. Variable timing parts move using oil pressure, so low or dirty oil is a common trigger on exhaust cams too. Checking the dipstick and the date of your last oil change is a free first step.
Why does the code mention the exhaust camshaft?
Many engines have two camshafts per bank, one that opens the intake valves and one for the exhaust. The code names the exhaust one so the shop looks at the right solenoid and sensor.
Is a timing chain involved?
Sometimes. When oil and the solenoid check out, a stretched timing chain or a worn tensioner can let the cam drift. A rattle on a cold start supports that, and a scan tool timing check can confirm it.
How much does it cost to fix P0014?
The most common fix, vvt solenoid / cam phaser repair, has a typical range of $180 to $1,225 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.
Typical range in 10 metro areas
Only the labor rate changes between cities. Same parts, same hours.
| Area | Typical range, estimate |
|---|---|
| Boston area, Massachusetts | $190 to $1,325 |
| New York City area | $190 to $1,275 |
| Los Angeles area, California | $190 to $1,300 |
| Chicago area, Illinois | $180 to $1,250 |
| Houston area, Texas | $170 to $1,200 |
| Dallas-Fort Worth area, Texas | $170 to $1,200 |
| Phoenix area, Arizona | $180 to $1,225 |
| Atlanta area, Georgia | $180 to $1,250 |
| Miami area, Florida | $170 to $1,225 |
| Seattle area, Washington | $190 to $1,300 |
P0014 by make
Causes and fixes differ by brand. Pick yours:
Related codes
- P0011: Intake camshaft timing too far advanced (bank 1)
- P0012: Intake camshaft timing too far behind (bank 1)
- P0013: Exhaust camshaft timing stuck (bank 1)
- P0016: Crankshaft and camshaft not lining up (bank 1)
More engine codes
Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.