Skip to content

Ignition and misfires code

P0306: Cylinder 6 misfire

How much to fix P0306? Typically $70–$320.

Typical repair range in the US · Estimate · Prices updated October 2026
$70 to $320

Wide range: this job varies a lot. Itemize your quote for a better answer.

Typical range, estimate. Built from labor wages and part price bands.
How this range is built
Part of the jobLowHigh
Parts$30$120
Labor: 0.4 to 1.2 hours × $110 to $150 an hour$44$180
Fees: shop supplies, disposal, diagnostics$0$15
Total, rounded$70$320

The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.

This is the range for the most common fix, ignition coil replacement (one coil). Which repair your car needs depends on a proper diagnosis.

The computer found that cylinder 6 is not burning its fuel on every turn. It tells by measuring how the crankshaft speeds up after each firing, and the push after cylinder 6 is weaker. On a V6 this is often the last cylinder in the firing layout.

Safe to drive?
Short trips only
Most common cause
Worn spark plug in cylinder 6

A steady light means short drives are okay; a flashing light means stop, because raw fuel can ruin the catalytic converter.

Get quotes from local shops

Got P0306? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.

Add a phone, an email, or both.

Fair Price is not a contractor or a repair shop. Who sees your request

What you may notice

Common causes, most likely first

  1. Worn spark plug in cylinder 6
  2. Failing ignition coil on cylinder 6
  3. Clogged or weak fuel injector for that cylinder
  4. Vacuum leak near that cylinder
  5. Low compression from a valve or ring problem

Check this first

Look up where cylinder 6 sits on your engine, then ask the shop to swap its coil with a neighbor and clear the code. If the miss moves, replace the coil. If not, the plug, injector or a leak near cylinder 6 is next.

Other repairs that sometimes fix P0306

RepairTypical range, US
Spark plug replacement$85 to $510
Fuel injector replacement (one injector)$170 to $820
Vacuum leak repair$90 to $460

Before you pay

Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.

Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).

P0306 questions

How do I know which cylinder is number 6?

The location depends on the engine layout, so use a diagram for your make and model. On a lot of V6 engines it is the rear cylinder on the second bank, and sits behind the intake, so access can be tight.

Should I replace the plug or the coil?

Start with the plug if it is overdue, and use the coil swap to check the coil. Cylinder 6 is sometimes hard to reach, so doing the test first can save you a repeat labor charge for the same spot.

Can I keep driving with this code?

A brief, easy drive is normally fine while the light is steady. Avoid towing or hard acceleration, and pull over if the light starts flashing, since the converter can overheat from unburned fuel.

How much does it cost to fix P0306?

The most common fix, ignition coil replacement (one coil), has a typical range of $70 to $320 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.

Typical range in 10 metro areas

Only the labor rate changes between cities. Same parts, same hours.

AreaTypical range, estimate
Boston area, Massachusetts$80 to $350
New York City area$75 to $340
Los Angeles area, California$75 to $340
Chicago area, Illinois$75 to $330
Houston area, Texas$70 to $310
Dallas-Fort Worth area, Texas$70 to $310
Phoenix area, Arizona$70 to $320
Atlanta area, Georgia$75 to $330
Miami area, Florida$70 to $320
Seattle area, Washington$80 to $340

Related codes

More ignition and misfires codes

Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.