Skip to content

ABS and brakes code

C0110: ABS pump motor circuit fault

How much to fix C0110? Typically $520–$1,700.

Typical repair range in the US · Estimate · Prices updated October 2026
$520 to $1,700
Typical range, estimate. Built from labor wages and part price bands.
How this range is built
Part of the jobLowHigh
Parts$300$1,200
Labor: 2 to 3 hours × $110 to $150 an hour$220$450
Fees: shop supplies, disposal, diagnostics$0$50
Total, rounded$520$1,700

The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.

This is the range for the most common fix, abs control module repair or replacement. Which repair your car needs depends on a proper diagnosis.

The ABS computer sees a problem with the pump motor circuit, meaning the motor may not run when asked or draws the wrong amount of current. Power, ground, the relay and the motor itself are all possible causes. The exact meaning varies by make, so check the scan tool or manual.

Safe to drive?
Short trips only
Most common cause
Failed ABS pump motor

Normal brakes usually still work, but without ABS help the wheels can lock in a hard stop, so leave extra room and brake early.

Get quotes from local shops

Got C0110? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.

Add a phone, an email, or both.

Fair Price is not a contractor or a repair shop. Who sees your request

What you may notice

Common causes, most likely first

  1. Failed ABS pump motor
  2. Bad relay or blown fuse
  3. Corroded connector or ground
  4. Low battery voltage
  5. Failing ABS module

Check this first

Check the ABS fuses first, then the battery and ground points. A shop can also listen for the pump during a test and measure its power with a scan tool, which tells them if the motor runs or if power is not reaching it.

Other repairs that sometimes fix C0110

RepairTypical range, US
Battery cable replacement$100 to $340
Battery replacement$150 to $470
Diagnostic scan (check engine light)$55 to $250

Before you pay

Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.

Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).

C0110 questions

Do I need a whole new module?

Often the pump is part of the module, but some shops rebuild them, or sell the motor separately. Ask for your options, with prices, before agreeing to a full module replacement.

Will brakes fail?

No. The regular brakes keep working. You lose anti-lock and stability help, so leave extra stopping distance and brake early, especially on wet roads, until the pump circuit is repaired.

Is it a battery problem?

It can be. Low battery voltage can set a pump circuit code, since the pump needs a strong feed to start. Test the battery and the charging system before you accept a pump or module repair.

How much does it cost to fix C0110?

The most common fix, abs control module repair or replacement, has a typical range of $520 to $1,700 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.

Typical range in 10 metro areas

Only the labor rate changes between cities. Same parts, same hours.

AreaTypical range, estimate
Boston area, Massachusetts$550 to $1,775
New York City area$540 to $1,750
Los Angeles area, California$540 to $1,775
Chicago area, Illinois$530 to $1,725
Houston area, Texas$510 to $1,700
Dallas-Fort Worth area, Texas$510 to $1,700
Phoenix area, Arizona$520 to $1,700
Atlanta area, Georgia$530 to $1,725
Miami area, Florida$510 to $1,700
Seattle area, Washington$550 to $1,775

Related codes

More abs and brakes codes

Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.