Skip to content

Emissions code

P0496: Fuel vapor purge flow while engine off

How much to fix P0496? Typically $80–$240.

Typical repair range in the US · Estimate · Prices updated October 2026
$80 to $240
Typical range, estimate. Built from labor wages and part price bands.
How this range is built
Part of the jobLowHigh
Parts$25$100
Labor: 0.5 to 0.8 hours × $110 to $150 an hour$55$120
Fees: shop supplies, disposal, diagnostics$0$15
Total, rounded$80$240

The hourly rate is the BLS Occupational Employment and Wage Statistics, May 2025 average pay for this trade in the US, $27.13 an hour, times 4 to 5.5 to cover what a shop bills (overhead, tools, insurance, profit). Parts are a band from budget aftermarket to the manufacturer part. Full method.

This is the range for the most common fix, evap purge valve replacement. Which repair your car needs depends on a proper diagnosis.

The purge valve should be closed unless the engine is running and the computer opens it. This code says fumes were still flowing into the engine when the valve was supposed to be shut. The usual reason is a valve that sticks open or has dirt on its seat.

Safe to drive?
Usually yes, for now
Most common cause
Purge solenoid stuck partly open

Safe to drive, but you may see hard starts right after fueling.

Get quotes from local shops

Got P0496? Tell us your ZIP and a shop near you can quote the repair. Free, takes a minute.

Add a phone, an email, or both.

Fair Price is not a contractor or a repair shop. Who sees your request

What you may notice

Common causes, most likely first

  1. Purge solenoid stuck partly open
  2. Debris in the valve seat
  3. Damaged vapor line
  4. Overfilling the tank soaked the canister
  5. Wiring that keeps the valve powered

Check this first

Avoid topping off the tank after the pump clicks, since that can soak the canister and cause this. If the car is hard to start after fueling, say so.

Other repairs that sometimes fix P0496

RepairTypical range, US
EVAP vent valve replacement$110 to $330
Gas cap replacement$5 to $95
Diagnostic scan (check engine light)$55 to $250

Before you pay

Got a quote already? Check it against the range. Want to see if your car has a recall tied to this problem? Check recalls by VIN.

Need to read a code yourself? OBD-II scanners on eBay (affiliate link, disclosure).

P0496 questions

Why does topping off the tank matter?

Liquid fuel pushed past the nozzle can run into the vapor canister and soak the charcoal inside, which ruins it. Stop filling when the pump clicks off the first time, and the canister stays dry.

Is this the same as a vacuum leak?

It acts like one, because extra air and fuel vapor enter the intake without being measured. The difference is the path: here the leak goes through the purge valve rather than through a cracked hose or gasket.

Do I need to replace the canister?

Only if it is soaked with fuel or cracked. The valve is far more often the real problem and costs much less, so a good shop will test the valve first and check the canister after.

How much does it cost to fix P0496?

The most common fix, evap purge valve replacement, has a typical range of $80 to $240 across the US. It is an estimate built from parts prices and local labor wages, not a quote. Your car and shop change it.

Typical range in 10 metro areas

Only the labor rate changes between cities. Same parts, same hours.

Related codes

More emissions codes

Code meaning written in our own words. Some codes mean different things on different makes, so check your scan tool or manual. Not a repair shop, estimates only.